Older Post



2018-06-10 / v1.10 (rev222.1)

Once again, the sidepanel and many technical features under the hood have been overdone/improved, adding new useful features, a much clearer appearance and countless of new possibilities …

Discussing the latest implementations (YouTube Video):
AutoTonic Scalereharmonization MIDI Plugin v1.10 Screencast @YouTube (External)

What's new …

  • MULTI mode for Headers -> when "MULTI" is ON then Headers will listen to all MIDI channels Ch.#1–16, no matter what channel currently is selected at the input filter method
  • OMNI/FILTER/THRU -> signal path improvements, will route signals on their according MIDI channels more accurately now (includes MIDI CC, Aftertouch, Channel Pressure etc, now), bugfixes
  • MONOPHONIC/POLYPHONIC (MONO/POLY mode) new input method that allows only one note to be active at a time, can be especially useful when used in combination with chord stackings for more accurate triggerings
  • DELAY feature for offseting incoming note signals by milliseconds, which is especially useful when using 'control instances' for automatic chord triggerings -> so Header switchings can be triggered before the actual incoming note press
    • DELAY can be set from 0-999 ms
    • ALT+click on DELAY will reset value to "0"
    • use clickdrag or double-click for numerical entry
    • when POWER=Off both, black and white keys are delayed
  • New output routing methods:
    • CH.# - current selected output channel
    • ALL - sends to Ch.#1-16 simultaneously
    • AUTO - sends to the corresponding MIDI channel automatically
  • PANIC feature
    • left click on PANIC sends Note Off signals on 0-127 on selected CH.#
    • ALT+click on PANIC sends Note Off signals 0-127 to ALL 1-16 MID channels
  • New Shortcut: ALT+click on input/output scrollwheel:
    • @input: resets filter method to "1-OMNI" (filter method "OMNI" with scrollwheel set to Ch.#1)
    • @output:  resets filter method to "AUTO-1" (filter method "AUTO" with scrollwheel set to Ch.#1)
  • SYNC function
  • Performance improvements
  • UI changes

2018-04-29 / v1.9 (rev220.1)

Mostly Technical Fixes (sorely needed improvements under the hood) + New Input Method:

  • New 'input channel #' methods (->lower scrollwheel=input channel number):
    • Omni = *All* incoming Midi Channels will be fed into the transposing engine (=now default)
    • Filter = Only *matching* signals will be transposed, other signals are muted/killed
    • Thru = Signals on *unequal channels* will be routed through without change
  • Newly opened 'Instances' will use previous input method (Omni/Filter/Thru)
  • 'ALT+Click' on 'New Instance'-button = new instance with *same* input/output channel number (default is: 'input/output channel count +1')
  • Fix: MIDI Control Data of 'input channel #' follows now 'output channel #' setting (MIDI CC, Program Change, Channel Pressure, Pitch Wheel)
  • UI Enhancements/Adaptions
  • AutoTonic v1.9 Block Diagram (Signal Path):
     

 

2018-03-02 / v1.8 (rev219.3)

AutoTonic got updated to version 1.8.219.3

AutoTonic v1.8 Update Features Overview Mute Keys Keyboard Splitting Chord Memorizer

  • Fixes & UI Improvements
  • Input & Output Mute Keys
  • Chord Memorizer (=Realtime Chord Switching)
  • Keyboard Splitting --Now you can:
    • Use Zones (eg, Left Hand triggers Chords -> Right Hand does 'Solo')
    • Create your own 'MIDI Channel' Zones (Multi-Instrument Triggerings)
    • Create Mappings that will dynamically morph while playing
    • Set up 'grace notes' that can be triggered completely independent
    • Use 'Feedback Loops' to automate harmony switchings
    • Create Overtone Scales that will vary from octave to octave
    • Use scales that will be played ascending/descending differently

      And many more techniques are thinkable of now…

Learn more here: AutoTonic v1.8 Release Notes
AutoTonic v1.8 Update Keysplitting & Realtime Chord Switching

2018-02-07 / v1.7 (rev217.3) „HIGH SIERRA“ COMPATIBILITY

  • This update affects „High Sierra“ users only! AutoTonic has been updated to v1.7.217.3 to provide better compatibility when using Apple's OS X 10.13.3 High Sierra in combination with Logic Pro X 10.4
    rev216.20→rev217.3 („Silent Update“ = most recent installer got replaced)

2018-01-23 / v1.7 (rev216.20)

v1.7 AutoTonic Update w/ MIDI CHORD Generator SCALES

2017-06-17 / v1.6 (rev215.12)

  • Fixes an issue where 'Channel Aftertouch' and 'MIDI CC' was not working

    („Silent Update“: All latest releases were updated –> 215.11=215.12)

2017-06-16 / v1.6 (rev215.11)

This public update fixes 2 minor bugs:

  • Category dialogue windows falsely opening in separate windows ("+" and "RENAME")
  • "Lydian" scale not getting detected when SCALE Modifier matches (xoxoxoxxoxox) or when selecting it from the Library

AutoTonic version 1.6 Full Mac Win MIDI Transposer Poly Aftertouch AT Patched Serial Cracked

2017-06-07 / v1.6 (rev215.10)

  • Bugfix: "Lydian" (xoxoxoxxoxox) was not working when selecting in the Library

    („Silent Update“: All latest releases were updated –> 2015.9=215.10)

2017-05-31 / v1.6 (rev215.9)

Multichannel processing and 422 new scales - AutoTonic updates its Modal MIDI Transposer and adds many useful features: I/O channel selectors, Polyphonic Aftertouch support, newly declared scales, UI improvements, bug fixes etc,

AutoTonic Version 1.6 Update Change Log Changelog

  • NEW: multiple instances (eg, for key splitting or multichannel processing)
  • NEW: I/O MIDI channel selectors for advanced MIDI routings
  • NEW: Polyphonic Aftertouch is now fully supported (eg, Yamaha CS-80)
  • NEW: over 400+ new scales, requires "resetting database", still not perfect but at least in progress…
  • UI improvement: MIDI numbers (#) now on OUTPUT keyboard as well
  • Bugfix: 'grey keys' got stuck when switching Headers while playing

2017-02-04 / v1.5 (rev213.2)

  • Minor changes, Updated Installer

    („Silent Update“: All latest releases were updated –> 213=213.2)

2016-11-19 / v1.5 (rev213)

  • Bugfix: 'black keys' notes getting stuck when turning POWER on while playing 

2016-10-14 / v1.4 (rev212)

  • Various fixes and improvements
  • HiRes (Retina) Displays are now supported

2016-10-04 / v1.3 (rev202)

  • Fixes a bug where the keyboard shortcut RETURN didn't reset the scale to 'Ionian' in unlocked ScaleModifier state
  • Fixes a bug with Scale/Tonic-Learn (NAME-lists were not refreshed properly when Library was opened)
  • Fixes a UI-Bug that occurred for Retina-Display users

AutoTonic NEW Version 1.3 FULL MAC WINDOWS 64 Bit Transposer MIDI Transposing Quantizer

2016-07-25 / v1.2 (rev198)

  • addWindow & editionWindow improvements
  • avoids Library lists jumping back while playing
  • PitchCorrection related fixes
  • Various slight UI improvements 

2016-07-18 / v1.1 (rev188)

  • "Permanence" for DEMO
  • Various slight improvements

2016-07-10 / v1.0 (rev176)

  • Initial AutoTonic launch

 

Silent Updates“ can be applied by re-installing the previously released versions. Silent Updates“ will be not sent out as an email update notification.

To apply new database changes (eg, the „422 new scales“ update) please use the
„reset database“ function in AutoTonic's MainCenterScreen.

If you have any questions please don't hesitate to contact support@autotonic.net we'll be happy to help you :)


2018-06-10 / v1.10 (rev222.1)

Once again, the sidepanel and many technical features under the hood have been overdone/improved, adding new useful features, a much clearer appearance and countless of new possibilities …

Discussing the latest implementations (YouTube Video):
AutoTonic Scalereharmonization MIDI Plugin v1.10 Screencast @YouTube (External)

What's new …

  • MULTI mode for Headers -> when "MULTI" is ON then Headers will listen to all MIDI channels Ch.#1–16, no matter what channel currently is selected at the input filter method
  • OMNI/FILTER/THRU -> signal path improvements, will route signals on their according MIDI channels more accurately now (includes MIDI CC, Aftertouch, Channel Pressure etc, now), bugfixes
  • MONOPHONIC/POLYPHONIC (MONO/POLY mode) new input method that allows only one note to be active at a time, can be especially useful when used in combination with chord stackings for more accurate triggerings
  • DELAY feature for offseting incoming note signals by milliseconds, which is especially useful when using 'control instances' for automatic chord triggerings -> so Header switchings can be triggered before the actual incoming note press
    • DELAY can be set from 0-999 ms
    • ALT+click on DELAY will reset value to "0"
    • use clickdrag or double-click for numerical entry
    • when POWER=Off both, black and white keys are delayed
  • New output routing methods:
    • CH.# - current selected output channel
    • ALL - sends to Ch.#1-16 simultaneously
    • AUTO - sends to the corresponding MIDI channel automatically
  • PANIC feature
    • left click on PANIC sends Note Off signals on 0-127 on selected CH.#
    • ALT+click on PANIC sends Note Off signals 0-127 to ALL 1-16 MID channels
  • New Shortcut: ALT+click on input/output scrollwheel:
    • @input: resets filter method to "1-OMNI" (filter method "OMNI" with scrollwheel set to Ch.#1)
    • @output:  resets filter method to "AUTO-1" (filter method "AUTO" with scrollwheel set to Ch.#1)
  • SYNC function
  • Performance improvements
  • UI changes

2018-04-29 / v1.9 (rev220.1)

Mostly Technical Fixes (sorely needed improvements under the hood) + New Input Method:

  • New 'input channel #' methods (->lower scrollwheel=input channel number):
    • Omni = *All* incoming Midi Channels will be fed into the transposing engine (=now default)
    • Filter = Only *matching* signals will be transposed, other signals are muted/killed
    • Thru = Signals on *unequal channels* will be routed through without change
  • Newly opened 'Instances' will use previous input method (Omni/Filter/Thru)
  • 'ALT+Click' on 'New Instance'-button = new instance with *same* input/output channel number (default is: 'input/output channel count +1')
  • Fix: MIDI Control Data of 'input channel #' follows now 'output channel #' setting (MIDI CC, Program Change, Channel Pressure, Pitch Wheel)
  • UI Enhancements/Adaptions
  • AutoTonic v1.9 Block Diagram (Signal Path):
     

 

2018-03-02 / v1.8 (rev219.3)

AutoTonic got updated to version 1.8.219.3

AutoTonic v1.8 Update Features Overview Mute Keys Keyboard Splitting Chord Memorizer

  • Fixes & UI Improvements
  • Input & Output Mute Keys
  • Chord Memorizer (=Realtime Chord Switching)
  • Keyboard Splitting --Now you can:
    • Use Zones (eg, Left Hand triggers Chords -> Right Hand does 'Solo')
    • Create your own 'MIDI Channel' Zones (Multi-Instrument Triggerings)
    • Create Mappings that will dynamically morph while playing
    • Set up 'grace notes' that can be triggered completely independent
    • Use 'Feedback Loops' to automate harmony switchings
    • Create Overtone Scales that will vary from octave to octave
    • Use scales that will be played ascending/descending differently

      And many more techniques are thinkable of now…

Learn more here: AutoTonic v1.8 Release Notes
AutoTonic v1.8 Update Keysplitting & Realtime Chord Switching

2018-02-07 / v1.7 (rev217.3) „HIGH SIERRA“ COMPATIBILITY

  • This update affects „High Sierra“ users only! AutoTonic has been updated to v1.7.217.3 to provide better compatibility when using Apple's OS X 10.13.3 High Sierra in combination with Logic Pro X 10.4
    rev216.20→rev217.3 („Silent Update“ = most recent installer got replaced)

2018-01-23 / v1.7 (rev216.20)

v1.7 AutoTonic Update w/ MIDI CHORD Generator SCALES

2017-06-17 / v1.6 (rev215.12)

  • Fixes an issue where 'Channel Aftertouch' and 'MIDI CC' was not working

    („Silent Update“: All latest releases were updated –> 215.11=215.12)

2017-06-16 / v1.6 (rev215.11)

This public update fixes 2 minor bugs:

  • Category dialogue windows falsely opening in separate windows ("+" and "RENAME")
  • "Lydian" scale not getting detected when SCALE Modifier matches (xoxoxoxxoxox) or when selecting it from the Library

AutoTonic version 1.6 Full Mac Win MIDI Transposer Poly Aftertouch AT Patched Serial Cracked

2017-06-07 / v1.6 (rev215.10)

  • Bugfix: "Lydian" (xoxoxoxxoxox) was not working when selecting in the Library

    („Silent Update“: All latest releases were updated –> 2015.9=215.10)

2017-05-31 / v1.6 (rev215.9)

Multichannel processing and 422 new scales - AutoTonic updates its Modal MIDI Transposer and adds many useful features: I/O channel selectors, Polyphonic Aftertouch support, newly declared scales, UI improvements, bug fixes etc,

AutoTonic Version 1.6 Update Change Log Changelog

  • NEW: multiple instances (eg, for key splitting or multichannel processing)
  • NEW: I/O MIDI channel selectors for advanced MIDI routings
  • NEW: Polyphonic Aftertouch is now fully supported (eg, Yamaha CS-80)
  • NEW: over 400+ new scales, requires "resetting database", still not perfect but at least in progress…
  • UI improvement: MIDI numbers (#) now on OUTPUT keyboard as well
  • Bugfix: 'grey keys' got stuck when switching Headers while playing

2017-02-04 / v1.5 (rev213.2)

  • Minor changes, Updated Installer

    („Silent Update“: All latest releases were updated –> 213=213.2)

2016-11-19 / v1.5 (rev213)

  • Bugfix: 'black keys' notes getting stuck when turning POWER on while playing 

2016-10-14 / v1.4 (rev212)

  • Various fixes and improvements
  • HiRes (Retina) Displays are now supported

2016-10-04 / v1.3 (rev202)

  • Fixes a bug where the keyboard shortcut RETURN didn't reset the scale to 'Ionian' in unlocked ScaleModifier state
  • Fixes a bug with Scale/Tonic-Learn (NAME-lists were not refreshed properly when Library was opened)
  • Fixes a UI-Bug that occurred for Retina-Display users

AutoTonic NEW Version 1.3 FULL MAC WINDOWS 64 Bit Transposer MIDI Transposing Quantizer

2016-07-25 / v1.2 (rev198)

  • addWindow & editionWindow improvements
  • avoids Library lists jumping back while playing
  • PitchCorrection related fixes
  • Various slight UI improvements 

2016-07-18 / v1.1 (rev188)

  • "Permanence" for DEMO
  • Various slight improvements

2016-07-10 / v1.0 (rev176)

  • Initial AutoTonic launch

 

Silent Updates“ can be applied by re-installing the previously released versions. Silent Updates“ will be not sent out as an email update notification.

To apply new database changes (eg, the „422 new scales“ update) please use the
„reset database“ function in AutoTonic's MainCenterScreen.

If you have any questions please don't hesitate to contact support@autotonic.net we'll be happy to help you :)